|
Choose Type
|
|
|
|
|
|
 |
| |
|
 |
| |
|
 |
| |
|
 |
| |
|
Agents For: Yella Terra, Harrop, Rotrex,
Jackson Racing, Sprintex |
|
|
|
|
|
|
Supercharger Kits
/
Toyota /
Soarer V8 / LS400 UZ31/UZ32 Celsior /
Crown |
| |
|
 |
|
Vehicle:
Toyota
Soarer V8 / LS400 UZ31/UZ32 Celsior /
Crown
Overview:
With over 10 years of Research and
Development into Supercharging the
Toyota 1UZ-FE V8 engine, Bullet Cars is
widely known as the Industry leader in
this field.
The Toyota Soarer/Lexus LS400
Supercharger kit is a true OEM style kit
that enhances the performance of these
vehicles. Based around the popular Eaton
M90 positive displacement Supercharger
which delivers maximum boost from 'off
idle' all the way to the redline, the
kit provides maximum torque at lower
engine speeds whilst retaining the
factory driveabilty and smoothness. The
new Bullet High flow cast manifold has
the provision for the factory cold start
injector and the idle control stepper
motor
Depending on the kit and other
ancillaries, power levels can be
increased up to 90% over standard.
Benefits:
Bullet’s world renowned cast intake
manifold with removable top plate
High Efficiency M90 positive
displacement supercharger
Cold Start Injector and Idle control
valve provision
OEM style installation
Fits under standard Soarer bonnet
6 Psi boost level for standard kit
Power in excess of 170 rear wheel
kilowatts
Parts Included:
Eaton M90 Positive Displacement
Supercharger with bolt-on pulley
Bullet High Flow Cast Intake Manifold
with removable CNC cut top plate
Bullet High Flow Cast Rear Intake
manifold with idle air control valve
provision
External bypass valve
Idler Bearing with mount
Engine and Supercharger 6PK Drive Belt
New intake manifold gaskets, nuts,
bolts, hoses, O'rings and clamps
New bottom Injector seals
Air Intake hoses and adpator
Rising rate fuel regulator (standard
kit only)
Comprehensive Installation
Instructions
Technical support available via Email
and Phone
Price:
$5490 – UZ31 Soarer / LS400 / Celsior /
Crown
$5790 - UZ32 Soarer
Fitting:
$1200
Time:
1-2 Days
Recommendations:
‘Plug and Play’ Wolf V500 ECU with
full Automatic transmission control and
traction control
Water to Air Intercooler
High Flow Bosch Injectors with plugs
Boost Upgrade Kit:
A Boost Upgrade kit is available for
those wanting to safely push the
internally standard engine that little
bit further. With the addition of Bullet
Extractors, high flow exhaust system and
Aftermarket Air Intake system, power can
be increased up to 90%. The new
standalone ECU is a true ‘Plug and Play’
muticontroller with full automatic
transmission control and traction
control built in. Forget having to wire
in a piggyback – this ECU can change
shift points in the auto transmission as
well giving complete control over
injection and ignition. For bigger power
increases, have a look at the Bullet
HTV1900 Supercharger kit or contact
Bullet regarding a custom built
engine/supercharger package.
The Boost Upgrade kit contains -
Bullet High Flow Injectors (Variety of
sizes available) with plugs
High Volume Fuel Pump
10 psi Bolt on Pulley
Plug and Play programmable standalone
ECU with full Automatic transmission
control and traction control
Price for the Upgrade kit starts at
$2999
Installation is an extra $800 plus
custom tune for the Boost upgrade kit,
if purchased with the basic kit.
Dyno Sheet:
|
|
 |
|
Vehicle:
Toyota 1UZFE HTV1900 Kit
Overview:
Breathtaking performance with ultra high
efficiency - Bullet's world first High
boost upgrade for the 1UZ-FE utilising
the HTV1900 Supercharger.
Forget the M90 or M112, this is THE
Supercharger to have nestled confidently
between your engine "V". This kit has
been developed to meet the needs of
those 1UZ owners chasing a real world
250kws+ at the wheels. The Harrop
HTV1900 is a Roots-type supercharger
manufactured utilising the latest Eaton
TVS (Twin Vortices Series) rotating
assembly. The Eaton TVS rotating
assembly features twin four-lobe rotors,
twisted 160 degrees. By comparison, the
original Eaton superchargers (for
example - the M90) features three lobes
twisted 60 degrees. The fourth lobe and
added twist, when combined with
redesigned air inlet and outlet ports,
creates a smoother, more efficient flow
of air into the engine. In addition to
improved overall efficiency, the Eaton
TVS supercharger has improved noise and
vibration characteristics as well.
The HTV1900 kit is a true OEM style kit
utilising the renowned Bullet High Flow
cast intake manifold. From the CNC cut
top plate to the unique Bullet high flow
rear entry, the
Bullet kit is unrivalled in engineering
precision and product development. The
HTV1900 delivers maximum boost from 'off
idle' all the way to the redline,
maximum torque at lower engine speeds
and drastically reduced air intake
temperatures when compared to the M90
and M112. The HTV1900 can support boost
levels in excess of 15psi and with the
increase in efficiency, produces
unlimited high rpm power that easily
outperforms any other 1UZ positive
displacement Supercharger kit on the
market. Guaranteed.
For maximum gains, Bullet recommends a
complete standalone engine management
system to take full advantage of this
Supercharger's potential.
Benefits:
Bullet’s world renowned cast intake
manifold with removable top plate
Ultra High Efficiency HTV1900 positive
displacement supercharger
OEM style installation
Fits under standard Soarer bonnet
Boost levels exceeding 15psi
Power in excess of 300 rear wheel
kilowatts
Ideal kit for forged internals
Parts Included:
Harrop HTV1900 Positive Displacement
Supercharger and bolt-on pulley
Bullet High Flow Cast Intake Manifold
with removable CNC cut top plate
Bullet High Flow Cast Rear Intake
manifold
Internal Bypass Valve with optional
interchangeable boost delivery system
Idler Bearing with mount
Engine and Supercharger 6PK Drive Belt
New intake manifold gaskets, nuts and
bolts
New bottom Injector seals
Intake piping with Idle air control
valve provision
Comprehensive Installation Instructions
Technical support available via Email
and Phone
Price:
$6490
Fitting:
$1200
Time:
1-2 Days
Recommendations:
‘Plug and Play’ Wolf V500 ECU with
full Automatic transmission control
Water to Air Intercooler
High Flow Bosch Injectors with plugs
Dyno Sheet:
|
|