Supercharger Kits /  Toyota  /  1UZFE

 



Overview:
The Budget kit has been introduced to our extensive range of Supercharger kits for the 1UZ to allow for the DIY installer who has their own Supercharger. This kit comes with the basic items needed to Supercharge your 1UZ, without the need for costly fabrication and research into what works and what doesn't. The basis of this kit is the Bullet Cast manifold with bolt on top plate. This design lends itself to a budget kit setup, which allows different superchargers to be used with a change of the top plate. Also included are perfectly CNC cut top plates that position your Supercharger exactly where it has to sit in relation to the crankshaft pulley, bolt on removable Supercharger drive pulleys for easy boost upgrades and top idler pulley with correct spacing mounting boss.

Superchargers that are currently supported are the Ford M90, GM Commodore M90, Buick M90 and the Ford M112.

 

 

Ford M90 Budget Kit

Bullet Cast Manifold, Bullet CNC bolt on top plate, removable drive pulley, Bullet High flow Supercharger rear entry (positions throttle body on right hand side), Rear entry adaptor, external bypass valve, bypass valve silicon hose, hose clamps, Idler pulley and mounting boss, 6Pk drive belt, Intake manifold to cylinder head gaskets, nuts and bolts.

Price: $2990

     

 

GM Commodore M90 Budget Kit

Bullet Cast Manifold, Bullet CNC bolt on top plate, press on boss with bolt on drive pulley, Supercharger rear entry to suit either GM throttle body or factory 1UZ throttle body (positions throttle body on lefthand side), Idler pulley and mounting boss, 6Pk drive belt, Intake manifold to cylinder head gaskets, nuts and bolts. Please note: GM Supercharger has to be machined to fit this manifold. Details will come with kit.

Price:  $2290

     

 

Buick M90 Budget Kit

Bullet Cast Manifold, Bullet CNC bolt on top plate, press on boss with bolt on drive pulley, Idler pulley and mounting boss, 6Pk drive belt, Intake manifold to cylinder head gaskets, nuts and bolts.

Price:  $1990

   

 

Ford Cobra M112 Budget Kit

Bullet Cast Manifold, Bullet CNC bolt on top plate, Bullet Billet snout with bolt on drive pulley, Alloy rear entry and throttle body flanges, Idler pulley and mounting boss, 6Pk drive belt, Intake manifold to cylinder head gaskets, nuts, studs and bolts, bottom injector seals and instructions for modifying the Supercharger.

Price:  $2790

     
 

Bullet Supercharger Intercooler suit 1UZ Bullet supercharger inlet manifold

Bullet design, manufactured and patented high efficiency air to water intercooler to suit Bullet 1uz inlet manifold. Can be retro fitted to all existing Bullet 1UZ supercharger installations.

Price:  $1390

     



Supercharger Parts:

Snout Recondition kit - $120
     Comes with front and rear snout bearings, High temperature Vitton seal, drive coupler and genuine Eaton Oil

Genuine Eaton Gear Oil - $35 per 180ml (M90 full oil capacity)

Range of Bolt On Pulleys to suit Bullet press on Boss - from $99


 



Overview:
With over 10 years of Research and Development into Supercharging the Toyota 1UZ-FE V8 engine, Bullet Cars is widely known as the Industry leader in this field.

The Universal Toyota 1UZ-FE Supercharger kit is specifically designed for use with an aftermarket Engine management ECU as it uses a new throttle body, but can be sold to suit the standard Lexus Throttle body if needed for an extra cost. The rear intake does not have provision for the Idle stepper motor, but this can also be added for an extra cost. Throttle body sits on the lefthand side of the engine. Will fit most applications for 1UZ Engines in Kit Cars, Hilux Utes, Commodores and other Street Machines

Kit can be ordered with either 6 or 9 psi bolt on pulley on the M90 based positive displacement Supercharger. The Bullet high flow cast Intake manifold is used for ease of installation and maximum performance.

Parts Included:
The Bullet Kit contains all hardware needed to fit the system to the vehicle -

Eaton M90 Positive Displacement Supercharger with integrated bypass valve and bolt-on pulley
Bullet High Flow Cast Intake Manifold with removable top plate
High Flow Cast Rear Intake manifold
Throttle Body with integrated idle control valve and TPS
Idler Bearing with mount
Engine and Supercharger 6PK Drive Belt
New gaskets, Nuts, bolts, hoses, O'rings and clamps
Comprehensive Installation Instructions

Power increase of up to 90% on a standard internal engine can be acheived with correct tuning and engine ancillaries.

 

Price:
$5500


Fitting: Call


 



Overview:
Hot Rod system available in 2 configurations, with a hight mount supercharger manifold which raises the supercharger 50mm. Also available with top entry superchargers to suit blower style induction hats.

 

Price:
$5500 + Bug Catcher Scoop


Fitting: Call


 



Overview:
Features dual throttle bodies, suitable for mid-engine sports cars or show engines where symmetry is important.
 

Price:
$5500


Fitting: Call
 


 

   
Navigation

Home Page
Contact Us
Order
Latest News
Bullet Cars
Choose Your Weapon
Supercharger Info

Choose Your Weapon

BMW
Chevrolet
Chrysler
Ford
Holden
Honda
Mazda
Mitsubishi
Subaru
Suzuki
Toyota

Supercharger Kits

Technical Information
Supercharger Kits
Custom Dyno Tuning
Custom OEM Design
& Development


Parts & Services

Engine Parts
Gearbox Conversion Kits
Engine Management
Custom Dyno Tuning

Bullet Cars

History & Price Guide

Bullet Cars For Sale

Website

Privacy Information
Terms & Conditions

                   
 

Bullet Cars Australia - Unit 5 / 2 Ant Road Yatala Queensland AUSTRALIA

Website By HotmetalDESiGN