Agents For: Yella Terra, Harrop, Rotrex, Jackson Racing, Sprintex, Eaton

   

Bullet Ultimate Exhaust                  

 <--- Back

 



Overview:
The standard Toyota factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system. These exhausts have been thoroughly tested for engine light problems and utilise the latest in C.T.B (Ceramic thermal Barrier) coatings to minimise under hood temperature.

From the laser cut flange plates to the chrome tip, the entire system is fully mandrel bent utilising all the factory mounting points on the vehicle. This mans that there are No chassis modifications needed to fit the exhaust to the vehicle.

Increasing the exhaust size to a high flowing 2/3/4 Inch system, with no noticeable increase in interior sound levels whilst idling and cruising, the Bullet exhaust gives a wonderful V6 note under full acceleration.
A gain of between 15 -20% in power and torque can be realised with the fitting of a Bullet exhaust and XEDE processor.

Please note: to reduce the chance of the engine warning light coming on, Bullet strongly recommends the fitment of the XEDE processorin conjunction with the exhaust.

Price:
$2690 – Mild Steel Exhaust Only

Fitting: $600

Time: 1 Day

Recommendations:
XEDE Processor
Bullet TRD Intercooled Supercharger system
Bullet Automatic Transmission Upgrade





Overview:
The standard Toyota factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system. These exhausts have been thoroughly tested for engine light problems and utilise the latest in C.T.B (Ceramic thermal Barrier) coatings to minimise under hood temperature.

From the laser cut flange plates to the chrome tip, the entire system is fully mandrel bent utilising all the factory mounting points on the vehicle. This mans that there are No chassis modifications needed to fit the exhaust to the vehicle.

Increasing the exhaust size to a high flowing 2/3/4 Inch system, with no noticeable increase in interior sound levels whilst idling and cruising, the Bullet exhaust gives a wonderful V6 note under full acceleration.
A gain of between 15 -20% in power and torque can be realised with the fitting of a Bullet exhaust and XEDE processor.

Please note: to reduce the chance of the engine warning light coming on, Bullet strongly recommends the fitment of the XEDE processorin conjunction with the exhaust.

Price:
$2490 – Mild Steel Exhaust Only

Fitting: $500

Time: 1 Day

Recommendations:
XEDE Processor
Bullet TRD Intercooled Supercharger system
Bullet Automatic Transmission Upgrade






Overview:
The standard Toyota factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system in either mild steel or stainless steel.

These exhausts have been thoroughly tested for engine light problems and utilise the latest in C.T.B (Ceramic Thermal Barrier) coatings to minimise under hood temperature. From the laser cut flange plates to the chrome tip, the entire system is fully mandrel bent utilising all the factory mounting points on the vehicle. This means that there are No chassis modifications needed to fit the exhaust to the vehicle.

Increasing the exhaust size to a high flowing 2.5 Inch system, with no noticeable increase in interior sound levels whilst idling and cruising, the Bullet exhaust gives a sportier exhaust note under full acceleration.

A gain of between 10 -15% in power and torque can be realised with the fitting of a Bullet exhaust and XEDE processor.

Price:    
Export $1695 gst excluded
Australia $1850 gst incuded

Fitting: $440

Time: 1 Day

Recommendations:
XEDE Processor
Bullet Supercharger system
 





Overview:
The standard Toyota factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system in either mild steel or stainless steel.

These exhausts have been thoroughly tested for engine light problems and utilise the latest in C.T.B (Ceramic Thermal Barrier) coatings to minimise under hood temperature. From the laser cut flange plates to the chrome tip, the entire system is fully mandrel bent utilising all the factory mounting points on the vehicle. This means that there are No chassis modifications needed to fit the exhaust to the vehicle.

Increasing the exhaust size to a high flowing 3 Inch system, with no noticeable increase in interior sound levels whilst idling and cruising, the Bullet exhaust gives a wonderful V8 note under full acceleration.

A gain of between 15 -20% in power and torque can be realised with the fitting of a Bullet exhaust and XEDE processor.

Please note: to reduce the chance of the engine warning light coming, Bullet strongly recommends the fitment of the XEDE processor in conjunction with the exhaust.


Price:
$2890 – Complete Stainless Steel Exhaust.

Fitting: $700

Time: 1 Day

Recommendations:
XEDE Processor
Bullet Supercharger system
 





Overview:
The standard Toyota factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system in either mild steel or stainless steel.

These exhausts have been thoroughly tested for engine light problems and utilise the latest in C.T.B (Ceramic Thermal Barrier) coatings to minimise under hood temperature. From the laser cut flange plates to the chrome tip, the entire system is fully mandrel bent utilising all the factory mounting points on the vehicle. This means that there are No chassis modifications needed to fit the exhaust to the vehicle.

Increasing the exhaust size to a high flowing 3 Inch system, with no noticeable increase in interior sound levels whilst idling and cruising, the Bullet exhaust gives a wonderful V8 note under full acceleration.

A gain of between 15 -20% in power and torque can be realised with the fitting of a Bullet exhaust and XEDE processor.

Please note: to reduce the chance of the engine warning light coming on, Bullet strongly recommends the fitment of the XEDE processorin conjunction with the exhaust.


Price:
$1180 – Ceramic coated extractors.
$1350 – Cat back stainless steel system.
$2490 – Headers back Stainless Steel Exhaust (with high flow catalytic convertors).

Fitting: $700

Time: 1 Day

Recommendations:
XEDE Processor
Bullet Supercharger system




Overview:
The standard Toyota factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system. These exhausts have been thoroughly tested for engine warning light problems and utilises the latest in C.T.B (Ceramic Thermal Barrier) coatings to minimise under hood temperature.

From the laser cut flange plates to the chrome tip, the entire system is fully mandrel bent utilising all the factory mounting points on the vehicle. This means that there are No chassis modifications needed to fit the exhaust to the vehicle.

Increasing the exhaust size to a high flowing 2/3/4 Inch system, with no noticeable increase in interior sound levels whilst idling and cruising, the Bullet exhaust gives a wonderful V6 note under full acceleration.
A gain of between 15 -20% in power and torque can be realised with the fitting of a Bullet exhaust and XEDE processor.

Please note: to reduce the chance of the engine warning light coming on, Bullet STRONGLY recommends the fitment of the XEDE processor in conjunction with the exhaust.

Price:    
Export $2290 gst excluded
Australia $2490 gst incuded

Fitting: $700

Time: 1 Day

Recommendations:
XEDE Processor
Bullet Supercharger system



Overview:
The standard Toyota factory headers are very restrictive and a good increase in power and torque can be achieved with the Bullet Ultimate Exhaust system. These exhausts have been thoroughly tested for engine warning light problems and utilises the latest in C.T.B (Ceramic Thermal Barrier) coatings to minimise under hood temperature.

From the laser cut flange plates to the chrome tip, the entire system is fully mandrel bent utilising all the factory mounting points on the vehicle. This means that there are No chassis modifications needed to fit the exhaust to the vehicle.

Increasing the exhaust size to a high flowing 2/3/4 Inch system, with no noticeable increase in interior sound levels whilst idling and cruising, the Bullet exhaust gives a wonderful V6 note under full acceleration.
A gain of between 15 -20% in power and torque can be realised with the fitting of a Bullet exhaust and XEDE processor.

Please note: to reduce the chance of the engine warning light coming on, Bullet STRONGLY recommends the fitment of the XEDE processor in conjunction with the exhaust.

Price:    
Export $2290 gst excluded
Australia $2490 gst incuded

Fitting: $700

Time: 1 Day

Recommendations:
XEDE Processor
Bullet Supercharger system


 

   
Navigation

Home Page
Contact Us
Order
Bullet Cars
Choose Your Weapon
Supercharger Info

Choose Your Weapon

BMW
Chevrolet
Chrysler
Ford
Holden
Honda
Mazda
Mitsubishi
Subaru
Suzuki
Toyota

Supercharger Kits

Technical Information
Supercharger Kits
Custom Dyno Tuning
Custom OEM Design
& Development


Parts & Services

Engine Parts
Gearbox Conversion Kits
Engine Management
Custom Dyno Tuning

Bullet Cars

History & Price Guide

Bullet Cars For Sale

Website

Privacy Information
Terms & Conditions

                   
 

Bullet Cars Australia - Unit 5 / 2 Ant Road Yatala Queensland AUSTRALIA

Website By HotmetalDESiGN