Agents For: Yella Terra, Harrop, Rotrex, Jackson Racing, Sprintex

   
Engines & Parts / Engine Parts - 1UZ
 
Forced Induction Engine
Ready for your Turbo or Supercharger system. Complete long motor, fully remanufactured and detailed hi-flow heads; forged pistons (9:1 Comp) Timing belts and gears. Blue printed and Balanced.
Price: $7900.00

Race Engine
Race engines to suit Multiple, Dual or Oversize Throttle Bodies. Hi-flow heads and cams, forged pistons (10.5:1), Blue printed and Balanced. Engine comes with timing belts, gears and cams dialed in.
Price: $9700.00

Bullet Supercharged Engine
Up to 430HP (ADR 37.01)
Ready to start forced induction engine, includes Autronic ECU. New looms (plug into firewall). Dual throttle body, Air cleaner, Hi-Flow catalytic converter, New belts, idlers and ancillaries. Fully Blue printed, Balanced and Detailed.
Price: $19800.00

Bullet Quad Cam V8 Engine
Quad Cam V8 300 HP (ADR 37.01)
Ready to start normally aspirated engine. Includes Autronic ECU. New looms (plug into firewall). Hi-flow catalytic converter. Air cleaner. Fully Blue printed, Balanced and Detailed. New belts, idlers and ancillaries.
Price: $13800.00
 

Bullet High Flow cast Intake Manifold
After years of development, Bullet has designed a dedicated Supercharger Intake manifold to suit the 1UZ-FE engine. The manifold features

* Bolt on Removable top plate - Allows different superchargers to be used with a quick change of the top plate, rather than a whole new manifold. Our top plates are CNC cut to perfection and have full chamfered edges to aid in flow. Top plates are available for a wide variety of Superchargers, including the Terracharger M90, GM Commodore M90, Buick M90, Ford Thunderbird M90, Ford Lightning M112 and Harrop HTV1900
* Unrivalled flow design - Manifold has individual runners cast in which promote faster Air speed and less disrupting turbulence
* Superior External design - Utilises the factory or Bullet High flow injectors, factory fuel rails and Rubber seals. The manifold easily clears the starter motor and In-valley heater pipe whilst keeping the height to an absolute minimum. This means that the Supercharger will fit under the standard bonnet profile

Price:  $1250 (including top plate)


1uz intercooler

1UZ intercooler core

1UZ intercooler

1uz intercooler and manifold

 

Bullet Supercharger Intercooler suit 1UZ Bullet supercharger inlet manifold

Overview:
Bullet design, manufactured and patented high efficiency air to water intercooler to suit Bullet 1uz inlet manifold. Can be retro fitted to all existing Bullet 1UZ supercharger installations.

Features:

  • Lightweight double o'ring water fitting to suit 3/4inch hose,
  • CNC machined billet outer casing to ensure a perfect fit between manifold and Bullet top plate.
Benefits:
  • Reduces intake charge temp by up to 60deg c
  • Increases power due to higher density inlet charge and further increase can be obtained by increasing boost pressure and timing advance
  • Prevents detonation

Price is for manifold intercooler core, core casing and fittings only....requires electric pump and front intercooler radiator to complete the installation, these will vary depending on application.

Price:  $1390

Please contact Bullet Cars for fitting cost and availablity.


 

Bullet Performance High Flow Heads
Fully serviced with 3 angle valve seats, new valve stem seals, inlet and exhaust ports, fully ported and flowed and combustion chamber polished. Bullet performance valve springs fitted.

Price:  $2750 per set exchange

     

  Bullet Performance Valve Springs
When you need to transfer the exact movement of the camshaft, the highest quality valve spring is required. Bullet Performance valve springs have significantly increased seat pressure over standard, allowing cleaner combustion at high RPM in high powered engines. A must for Supercharged engines or engines with high lift cams.
Coil Bind: .835
Open Pressure: 160 @ .990
Seat Pressure: 55 @ 1.390

Price:  $395
     
  Remote Oil Filter Adaptor -
CNC Machined from Billet Aluminium, this block comes with anodised fittings and bolts directly to the 1UZ block. Allows fitment of remote Oil filter adaptor. Braided Oil lines are available on request

Price:  $175

     
  Bullet Billet Inlet and Exhaust Cams -
Made from the highest quality SG Cast Iron Billet material, these cams can be ground from a blank billet to either our set specifications or your own.

Price:  $795 (set of two)

     
Water Pump
Price:
  $196.00
Cam Belt
Price:
  $78.00
Cam Idler Bearing
Price:
  $79.00
     
Cam Tensioner Bearing
(Complete Tensioner)
Price:
  $149.00
ACL Race Bearings Mains
Price:
  $175.00
ACL Race Bearings Conrods
Price:
  $155.00
     
Full Engine Gasket Set
Price:
  $490.00
Tappet Cover Gaskets
Price:
  $39.00
Head Gasket
Price:
  $98.00
     
Inlet Manifold Gaskets
(Genuine)
Price:
  $59.00
Supercharger Manifold Gaskets
(Bullet)
Price:
  $49.00
Rotor Button
Price:
  $30.00
     
Distributor Cap
Price:
  $95.00
Front Main Seal
Price:
  $28.00
Rear Main Seal
Price:
  $48.00
     
Injectors (Various)
Price:
  POA
High Performance Leads
Price:
  $198.00
ARP Rod Bolts
Price:
  $169.00
     
ARP Head Stud Kit
Price:
  $478.00
Ross Forged Pistons 8.5:1 or 10.5:1
Price:
  $1250.00
Walbro Fuel Pump
Price:
  $265.00
     
Sard Fuel Pump
Price:
  $425.00
2 Bar Map Sensor
Price:
  $130.00
Boosta Pump
Price:
  $550.00
     
     
Fan Belts (Various)
Price:
  $POA 
Pulley Bearings (Various)
Price:
  $POA
Piston Ring Sets
Price:
  $398.00
     
 

Prices subject to change anytime without notice


   
Navigation

Home Page
Contact Us
Order
Latest News
Bullet Cars
Choose Your Weapon
Supercharger Info

Choose Your Weapon

BMW
Chevrolet
Chrysler
Ford
Holden
Honda
Mazda
Mitsubishi
Subaru
Suzuki
Toyota

Supercharger Kits

Technical Information
Supercharger Kits
Custom Dyno Tuning
Custom OEM Design
& Development


Parts & Services

Engine Parts
Gearbox Conversion Kits
Engine Management
Custom Dyno Tuning

Bullet Cars

History & Price Guide

Bullet Cars For Sale

Website

Privacy Information
Terms & Conditions

                   
 

Bullet Cars Australia - Unit 5 / 2 Ant Road Yatala Queensland AUSTRALIA

Website By HotmetalDESiGN