Home > Parts & Services > Engine Parts

1UZ-FE Performance Parts

Engines

Forced Induction Engine
Ready for your Turbo or Supercharger system. Complete long motor, fully remanufactureed and detailed hi-flow heads; forged pistons (9:1 Comp) Timing belts and gears. Blue printed and Balanced $7900.00
Race Engine
Race engines to suit Multiple, Dual or Oversize Throttle Bodies. Hi-flow heads and cams, forged pistons (10.5:1), Bule printed and Balanced. Engine comes with timing belts, gears and cams dialed in. $9700.00
Bullet Supercharged Engine - up to 430HP (ADR 37.01)
Ready to start forced induction engine, includes Autronic ECU. New looms (plug into firewall). Dual throttle body, Air cleaner, Hi-Flow catalytic converter, New belts, idlers and ancillaries. Fully Blue printed, Balanced and Detailed. $19800.00
Bullet Quad Cam V8 300 HP (ADR 37.01)
Ready to start normally aspirated engine. Includes Autronic ECU. New looms (plug into firewall). Hi-flow catalytic converter. Air cleaner. Fully Blue printed, Balanced and Detailed. New belts, idlers and ancillaries. $13800.00

 

Engine Parts

1UZ Intake Manifold

Bullet High Flow cast Intake Manifold
After years of development, Bullet has designed a dedicated Supercharger Intake manifold to suit the 1UZ-FE engine. The manifold features

  • Bolt on Removable top plate - Allows different superchargers to be used with a quick change of the top plate, rather than a whole new manifold. Our top plates are CNC cut to perfection and have full chamfered edges to aid in flow. Top plates are available for a wide variety of Superchargers, including the Terracharger M90, GM Commodore M90, Buick M90, Ford Thunderbird M90, Ford Lightning M112 and Harrop HTV1900
  • Unrivalled flow design - Manifold has individual runners cast in which promote faster Air speed and less disrupting turbulence
  • Superior External design - Utilises the factory or Bullet High flow injectors, factory fuel rails and Rubber seals. The manifold easily clears the starter motor and In-valley heater pipe whilst keeping the height to an absolute minimum. This means that the Supercharger will fit under the standard bonnet profile

Price: $1250 (including top plate)

 

Bullet Performance High Flow Heads
Fully serviced with 3 angle valve seats, new valve stem seals, inlet and exhaust ports flowed and combustion chamber polished. Bullet performance valve springs fitted.

Price: $1750

Bullet Performance Valve Springs
When you need to transfer the exact movement of the camshaft, the highest quality valve spring is required. Bullet Performance valve springs have significantly increased seat pressure over standard, allowing cleaner combustion at high RPM in high powered engines. A must for Supercharged engines or engines with high lift cams.
Coil Bind: .835
Open Pressure: 160 @ .990
Seat Pressure: 55 @ 1.390

Price: $395

 

Bullet Billet Inlet and Exhaust Cams -
Made from the highest quality SG Cast Iron Billet material, these cams can be ground from a blank billet to either our set specifications or your own.

Price: $849 (set of two)

 

Remote Oil Filter Adaptor -
CNC Machined from Billet Aluminium, this block comes with anodised fittings and bolts directly to the 1UZ block. Allows fitment of remote Oil filter adaptor. Braided Oil lines are available on request

Price: $175

 

Water Pump $159.00
Cam Belt $66.00
Cam Idler Bearing $79.00
Cam Tensioner Bearing (complete tensioner) $149.00
Main Bearing Sets $375.00
Conrod Bearing Sets $290.00
Full Engine Gasket Sets $490.00
Tapet Cover Gaskets $39.00
Head Gaskets $98.00
Inlet Manifold Gasket (Genuine) $59.00
Supercharger Manifold Gasket (Bullet) $49.00
Rotor Button $27.00
Distributor Cap $83.00
Front Main Seal $28.00
Rear Main Seal $48.00
Injectors various P.O.A
Hi Performance Leads $198.00
ARP Rod Bolts to suit 1UZ
Price $169.00
ARP Head Stud Kit to suit 1UZ
Price: $478.00
ROSS Pistons - decompressed 9.0:1
Price: $1690.00
Walbro Fuel Pump
Price: $265.00
Sard Fuel Pump
Price: $425.00
ACL Pistons in 8.5:1 or 10:1
Price: $1490.00
Boosta Pump $550.00
2 Bar Map Sensor $130.00
Pulley Bearings Various P.O.A
Piston Ring Sets $398.00
Fan Belts Various P.O.A

 

ALL PRICES ARE IN AUSTRALIAN DOLLARS INCLUDING GST.
TO CONVERT TO YOUR LOCAL CURRENCY, VISIT WWW.XE.COM

© 2007 Bullet Cars. All Rights Reserved. Disclaimer